Desert Spring furnace humidifier

Desert Spring Furnace Humidifier
Installation Guide

    Introduction
  1. Selecting a Location
  2. Assembly
  3. Hanging the Basin
  4. Electrical Connections
  5. Water Connections
  1. Installing the Disk Wheel
  2. Installing the Lid and Adjusting the Water Level
  3. Connecting the Air Supply
  4. Startup and Shutdown
  5. Parts List (Tech. Spec.)

8. Connecting the Air Supply 

  • Use one of the supplied wire clamps to hold the flex ducting to the air take-off.
  • Use the remaining wire clamp to secure the flex duct to the humidifier's inlet.
  • For maximum efficiency, do not let the flex duct sag. If you need to, trim the length of the flex duct ensure that you cut the ends square.
  • If the humidifier is far enough from the take-off to cause strain on the ducting, it may be necessary to buy a longer flex duct at your local hardware store.
  • Ensure damper is in the open position.
  • Running the Furnace with the hose attached to it will allow the hose to stretch and reach further



Damper Diagram




About the Desert Spring Humidifier | Specifications | How it Works | Installation Guide | How it Works | FAQ | Testimonials
AutoFlush System | Humidifier Filter | Digital Hygrometer | Humidifier Accessories
Buy Now in USA | Buy Now in Canada | Shopping Cart | Store Policies | Contact Us | Site Map

Copyright 2002-2007 Just-Humidifiers.com. All Rights Reserved.